There are tactical radios, radios to talk to air traffic control (ATC) and radios that help navigate the aircraft, GPS, VHF nav, distance measuring equipment (DME), automatic direction finder (ADF), Satcom telephones, radar altimeters and transponders, and weather radars or weather-receiving devices.
How many channels do I need for RC plane?
A standard RC transmitter you buy for a RC plane has 6 channels. These channels are controlling the rudder, elevator, ailerons, motor, Aux 1, and Aux 2. So basically each channel controls a different motor. Aux 1 and Aux 2 are reserved for different features on your plane.
What does the flybar do on a RC helicopter?
At each end of the flybar is an airfoil paddle. The flybar moves in direct response to the tilting of the swashplate, which is controlled by the servos. A flybar also acts to stabilise the helicopter in flight.
What is a 2 channel radio?
A two-way radio is a small, handheld device that can receive and transmit radio signals. It is designed for one-on-one communication and requires two or more similar devices to be tuned into the same channel in order to work. Two-way radios are sometimes referred to as walkie-talkies or handheld-radios.
What does 2.4 GHz mean for RC cars?
The radio technology of RC cars these days uses the 2.4 GHz frequency, which makes it possible to drive dozens of cars simultaneously without having to manually change the frequencies. After the transmitter and the car’s receiver are bound, their functioning won’t be interfered by other radio equipment.
Do helicopters need ATC?
If these helicopters are operating in controlled airspace, communication with ATC will be done by normal VHF radio. There is no need for a dedicated communications person, the pilot will be in contact with ATC.
What is a 6 Channel RC plane?
How many channel transmitter do I need?
The minimum we suggest is 6 but ideally 8. When adding in a camera and gimbal to the mix this can quickly grow further (shutter, pan, tilt, roll, gimbal mode, etc). For a single operator setup with camera you would want a minimum of 8 channels for the core functions, and ideally 12+.
