How do I connect my avtech DVR to the Internet?

∎ Set the network configuration of AVTECH product Go to the system configuration page, and select “Network”. Check your network environment, and choose from STATIC IP, PPPOE or DHCP to connect your DVR or network camera to the Internet.

How do I set up my avtech DVR for remote viewing?

Plug and Play

1. Connect RJ45 cable to a router hooking up with Internet.
2. Download the AVTECH mobile app EagleEyes – and install.
3. Register an account for EagleEyes Cloud Services on EagleEyes.
4. Scan the barcode (on the monitoring display or on the device itself, depending on the device you have).
5. Enter the Captcha Code.

How do I activate avtech CMS plus?

In “System Config” of CMS tool bar you can activate it anytime. 2. The AVTECH CMS Activation dialog pops up. Enter a registered E-mail and password and then click on “Activate” button to continue.

How do I reset my password on my avtech DVR?

AVTECH DVRs reset

1. With a tweezers close the contact between the pins.
2. Turn on the DVR and wait until you hear a beep.
3. Remove the tweezers while the DVR is still on.
4. Wait until the DVR restarts.
5. Use the admin/username and password to login.

How can I watch my DVR online without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port – By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

What is a WiFi NVR?

NVR stands for Network Video Recorder. NVR systems record and store video footage directly from the network it lives on. These systems work with an advanced type of camera, called IP cameras. They do so using either an ethernet cable or wirelessly via an existing WiFi network. DVR stands for Digital Video Recorder.

How do I set my DVR for remote viewing?

DVR Viewer Software Setup for Network / Remote Internet Camera View

1. DVR Viewer Setup.
2. Assign an IP Address to your Surveillance DVR.
3. Local Area Network (LAN) DVR Viewer Access.
4. Setup Port Forwarding on your Router.
5. Setup static DHCP IP Address.
6. Setup Dynamic DNS on your Router.
7. Setup Internet Connection to your DVR.

How can I watch my CCTV DVR on my computer?

Web Browser Remote Access Setup Instruction

1. Connect your DVR to your router with a CAT-5 network cable.
2. Connect a monitor to your DVR if you have not already done so and power your DVR up.
3. Access the DVRs menu system using a mouse or the wireless remote control.
4. On the DVR System Menu click the Network Sub-Menu.

How do I reset my avtech DVR to factory settings?

How can I access my DVR from outside Network?