FE cylinder heads are identifiable by their casting number and date code. This is a C0AE-6090-D cylinder head for 1960 352 and 1961–1962 390. The casting number (bottom arrows) is almost never the same as the Ford part number.
How do I know which 302 heads I have?
The casting number is located under the valve cover, in the middle of the cylinder head. It is a combination of a number and four letters; C6ZZ-A, for example. According to ClassicMustang, casting numbers may change from year to year and are usually the same or nearly the same as the cylinder head part number.
How do I identify a Ford v8 head?
Look for three different locations where your Ford cylinder head code number will be located: on top of the head under the valve cover; on the bottom of the head, requiring the head to be removed; and on the side of the head just under the valve cover lip.
How do I identify a Ford 260 head?
The 260 heads have larger 52- to 55-cc kidney-shaped chambers with the same valve size. Expect to see C2OE-F, C3OE-B prior to February of 1964. In February of 1964, Ford came out with an improved 260 head with larger 1.67/1.45- inch valves along with the same 52- to 55-cc chambers. The revised head is numbered C4OE-B.
How do I know if my engine block is FE?
The casting number is on the right (passenger) side of the block, in the front. FE (330-428 SCJ) note: nearly all FE blocks have 352 cast on the front of them. Solid Lifters, 2 core plugs at front of block, 4 in rear, and 3 on each side.
How do I know if my Ford is a big block?
FE Series block casting numbers are located on the passenger’s side of the block just below the deck. Expect to see six-digit casting numbers prior to 1960 and the more familiar Ford alphanumeric casting number from 1960-on.
Are 289 and 302 heads the same?
unless some one did some tricky stuff and loaded it with 302 guts. Non of those things identify it as a 289 for sure. Pretty much everything is interchangeable between 289/302s…. Look by the starter for the block casting date and date code.
How do I know if I have a 5.0 ho?
Registered. So . . if it ishas a 351W firing order, its an HO. If it has the 289/302 firing order, its a non HO. If it has the E6 heads, its a non HO.
What does FE stand for in Ford engines?
FE (which means “Ford Engine,” not Ford-Edsel, nor Ford Engineering) variety comes from a broad selection of bore and stroke sizes to achieve cubic-inch displacements. The 332 and 352 are fraternal twins, virtually identical engines with 4.00-inch bores.
Are all Ford FE blocks the same?
Ford FE engine blocks used for performance builds are generally selected from one of three groupings: 390, 428, and 427. While other blocks are out there, these three are the foundation for the vast majority of high-performance street and track applications.
Is the Ford 390 a big block?
The Ford 390 was a 6.4-liter (390.04ci) gasoline big block V8 engine that was produced between 1961 and 1976. The 390 was part of the Ford-Edsel (FE) engine family, which was produced from 1958 to 1976. The 390 is a torquey motor that’s still popular with performance engine builders.
How do I identify a Ford 429 engine?
How to Identify a 429 Ford Block
- Count the number of bolts on the valve cover. According to Fordification, it should have seven bolts.
- Locate the engine ID tag. According to Car Craft Magazine, you should see it attached to the intake manifold or the ignition coil on the front of the engine if it remains present.
