Reset your SoundDock system by following these steps: Unplug the SoundDock power cord from the back of the unit. Wait 10 seconds. Reconnect the power cord. There will be an audible beep immediately after power is first connected.
How long does Bose SoundDock battery last?
When fully charged, the battery typically provides about 5 hours of playing time at a moderate volume levels. Battery power is consumed faster at higher volume levels. The typical life span of the battery is about 300 charge cycles.
Does Bose SoundDock charge iPod?
Yes, the Bose SoundDock III will charge your iPod while it is docked and playing.
How do you fix a Bose speaker that is not charging?
Battery will not charge
- Disconnect and reconnect the charging cable at both ends.
- Reset your product.
- Check if the connected power outlet is working.
- Try a different charger.
- Check that the USB charger meets the power requirement of your product.
- Your product may need service.
How do you turn on a Bose SoundDock?
Plug the small end of the AC power cord into the AC power connector on the back of the unit. 3. Plug the other end into a live AC (mains) outlet. After you hear two short tones from your SoundDock 10 system, it is ready to use.
How do I change the battery in my Bose SoundDock?
To replace the remote control battery:
- On the back of the remote control, insert the edge of a coin in the groove on the battery door.
- Rotate the groove counterclockwise to unlock it.
- Gently tap the front of the remote so the door drops out.
- Remove the old battery.
Is Bose SoundDock rechargeable?
The SoundDock is ready to go anywhere with a slim design, a built-in carry handle, and a rotating iPod docking station–not to mention a rechargeable battery. Rechargeable lithium-ion battery offers hours of playing time between charges. You’ll get about eight hours of playback at normal volume.
What does a Lightning to 30-pin adapter do?
This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories. * Supports analog audio output and USB audio, as well as syncing and charging. Video output not supported.
What do you use to connect Bose SoundDock to your iPhone?
I purchased the BMR A2DP Bluetooth 4.1 Music Receiver Adapter for Bose SoundDock, iPhone from Amazon. That solves the problem of having your phone tethered to the aux cord. It also solves the need for a remote.
Does SoundDock work with iPod Nano?
The handy remote gives you power and volume control, track seek, and iPod playlist navigation from almost anywhere in the room. Compatibility. The SoundDock Portable digital music system is Apple-certified and compatible with iPhone, iPod touch, iPod nano, iPod classic and any iPod featuring a click wheel.
How do I recharge my Bose Portable iPod Nano?
You can recharge the battery with any wall outlet or use an optional spare battery for a little extra time (the unit batteries are easily user-swappable). Rotating iPod docking station spins shut when not in use, for protection during transit. Bose Quality Audio.
What is the AUX input on a SoundDock?
Thanks to the SoundDock’s 3.5mm auxiliary input, you can play other audio sources, such as a portable DVD players, CD players, or other MP3 players. Remote Included. The handy remote gives you power and volume control, track seek, and iPod playlist navigation from almost anywhere in the room.
