Press and hold the “Init” button behind your TeraStation HD-H/HS-D device for 10 seconds. The Diag LED light will start flashing. The password is reset.
How do I reset TeraStation pro?
To reset the TeraStation to its factory default settings, power on the unit and hold down the reset button for five seconds. In the Web Admin interface, you can initialize almost all settings, including things that are not initialized from the reset button without the data saved in the TeraStation.
What is the admin password for Buffalo NAS?
The default username and password are “admin” and “password”.
How do I reset my Buffalo NAS to factory settings?
Initializing from Settings
- In Settings, navigate to [System] – [Restore/Erase].
- Click [Restore LinkStation].
- The “Confirm Operation” screen will open. Enter the displayed number within 60 seconds, then click [Apply].
How do you restart TeraStation?
To shut down and reboot the TeraStation, press and hold the reset button. Normally, these LEDs blink green when drives are accessed. If a drive fails, its LED will turn red or amber.
How do I turn off Buffalo TeraStation?
Turning the TeraStation On and Off
- Press the power button on the TeraStation to turn it on.
- To turn off the TeraStation, press and hold down the power button for three seconds until it beeps.
- You can also shut down or restart the TeraStation remotely from.
- When the power LED turns off, the shutdown process is completed.
How do I access my Buffalo NAS?
To test access, go to BuffaloNAS.com and enter the name you assigned. You should be taken to the WebAccess interface for your LinkStation. If this does not work, it is likely either port forwarding settings in the router are incorrect, or you are attempting to use an external port that is blocked by the ISP.
How do I connect to my Buffalo TeraStation?
Knowledge Base
- Connect the TeraStation / LinkStation to your network using the supplied Ethernet cable.
- Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation.
- Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”.
How do I format a Buffalo NAS drive?
Select a drive that shows “Unformatted” and click “Format”. Select a file system from the drop-down list and click “Format”. When the format is finished click “OK” and then click “Close”.
How do you set up a Buffalo TeraStation?
Setup your Buffalo NAS out of the box
- Connect the TeraStation / LinkStation to your network using the supplied Ethernet cable.
- Plug in the Power cable / AC adapter and connect to the TeraStation / LinkStation.
- Power on the TeraStation / LinkStation by pressing the Power button, or by moving the power switch to “ON”.
How do I turn off TeraStation?
How do I shutdown my Buffalo NAS?
To turn off the LinkStation, hold down the power button for 3 seconds. The power LED will flash as the unit shuts down.
How do I reset the TeraStation administrator password?
Select [Create a special USB drive for password recovery]. This USB memory device will reset the TeraStation administrator password to the default password, then click [Execute].
How do I Reset my TeraStation to factory settings?
9 Drive Lock Open the front panel with the key to replace hard drives or press the Reset Button. 10 Reset Button With the TeraStation powered on, hold down this button until it beeps (about 5 seconds), to reset the TeraStation’s IP address and Password to the factory defaults.
How do I Configure my TeraStation using NAS navigator2?
To configure your TeraStation, use the web-based Web Admin from a browser on a computer connected to the same network. 1 Launch NAS Navigator2. For Windows, click on the [BUFFALO NAS Navigator2] icon on your desktop. For Mac OS X, double-click on the [NAS Navigator2] icon in the Dock. 2 3 Note:
How do I use the power mode switch on my TeraStation?
To use this feature, install NAS Navigator 2 on your computer(s) and then set the Power Mode Switch on the back of your TeraStation to Auto. Notes: • After you turn off your computer, it may take several minutes for the TeraStation to shut down.
