How do I reset my Lexmark Fuser?

Press and hold and while turning the printer on. Release the buttons when the clock appears. CONFIG MENU appears on the first line of the display. Press until you see Reset Fuser Cnt, and then press .

How do I reset my Lexmark printer maintenance?

To clear the maintenance message:

1. Enter the CONFIG menu of the printer.
2. Press the right arrow Menu button until you see Reset Maint Cnt (or Reset Maint Count) as a choice.
3. Press the Select button once.
4. Press Select again.
5. To exit the CONFIG menu, press Return until you are back at the main menu.

How do you reset the fuser on a Lexmark cs725?

From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.

How do you fix a fuser on a Lexmark printer?

Replacing the fuser

1. Turn off the printer, and then unplug the power cord from the electrical outlet.
2. Open doors A and D.
3. Remove the fuser.
4. Unpack the new fuser.
5. Insert the new fuser.
6. Close doors D and A.
7. Connect the power cord to the electrical outlet, and then turn on the printer.
8. Reset the fuser maintenance counter.

What does fuser life warning mean?

When the “Fuser Unit Near Life” message appears on the display screen, prepare a replacement fuser unit. When the “Change Fuser Unit” message appears, replace the fuser unit. The life expectancy of the fuser unit is up to 60,000 pages for A4 simplex printing.

What is a service fuser error?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. The meaning of the fuser error depends on the error code number associated with it.

How do you reset a fuser?

Reset Fuser

1. Press the [Machine Status] button on the Control Panel.
2. Select the [Supplies] tab on the Touch Screen.
3. Select the [Fuser] button.
4. Select the [Reset Counter] button and then the [Yes] button to reset the Fuser.
5. Select the [Close] button to return to the default (Copy) screen.

How do you reset the maintenance light on a Lexmark ms610dn?

How To Reset Lexmark Maintenance Kit?

1. Turn on your Lexmark printer after replacing the maintenance kit.
2. Press and hold the Select + Return buttons for 8 seconds.
3. Release the buttons when the reset maintenance control menu is displayed.
4. If your printer displays the maintenance message, press the Select button.

How do I fix a fuser error on my printer?

Solution one: Reset the printer

1. Press the Power button to turn off the printer.
2. Disconnect the power cord from the rear of the printer.
3. Wait 30 seconds, and then reconnect the power cord.
4. Press the Power button to turn on the printer. Wait for the product to start.
5. Try printing again.

What is a fuser error on a Lexmark printer?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. If the fuser error returns, you can try reinstalling the fuser unit.

What is a fuser kit on a laser printer?

The fuser unit is a very important component of laser printers. The fuser unit, which is essentially two heated rollers, uses pressure and heat to fuse the toner powder onto the paper. Depending on your printer model, the fuser unit may be sold separately or it may be included in the printer’s maintenance kit.