• Utilize a power bank The updated PushTracker E2 has been thoroughly tested and should last approximately 16 hours for average usage with the SmartDrive MX2+ (ie. 2 miles traveled at 3 mph).
How do you charge a smart drive?
To charge the drive unit, it must be plugged into a mains power outlet via the SmartDrive charging cable for approximately 3hrs for a full charge. There are LEDs on the charge box that indicate power/charging/fully charged. When the drive unit is on, 4 blue lights means fully charged.
Can you use smart drive in rain?
The SmartDrive is not designed to be driven in heavy rain/ snow or on wet/icy surfaces which may cause malfunc- tion or damage. Do not use in these conditions or on these surfaces.
How do SmartDrive cameras work?
When a vehicle with SmartDrive 360 experiences a risky maneuver, such as swerve, U-turn, high impact/collision, or the driver initiates a manual recording, video is captured from all four cameras. The video is then automatically offloaded from the SmartRecorder, along with the in-cab and forward-facing camera views.
Is the Smart Drive watch waterproof?
Once you own a SmartDrive, you will never want to leave the house without it… and you won’t have to because it is sealed and water resistant. Use it in the rain and drive straight through puddles if you want!
Are smart cars good in the rain?
Rain the first 45 minutes or so, somewhat heavy at times. Smart did very well. I did slow down on I-20 a bit in the heavy rain to avoid hydroplaning. After it stopped raining, it was quite windy, with the wind from the north as I was heading west.
Is SmartDrive always recording?
SmartDrive extends always-on recording storage capability, enhances base video capture platform workflow.
What triggers SmartDrive camera?
With SmartDrive 360, risky maneuvers such as swerving, U-Turns or collisions automatically trigger a video recording from up to four cameras simultaneously for unprecedented coverage.
How fast does SmartDrive MX2 go?
Lightweight, Intuitive & Easy to Install Drive Range (level / no resistance conditions): 12 miles (19 km) Max speed (level up to 6° incline): Adjustable (4 mph, 6 km/h)
How fast does smart drive go?
The SwitchControl is programmable from 1-5.5 mph and can be easily adjusted and tracked through the PushTracker App – also designed specifically for the SmartDrive MX2+.
Where can I get service for my SmartDrive MX2?
SmartDrive MX2 It is STRONGLY recommended to contact MAX Mobility directly for service if you live inside the U.S. or Canada and your device is still under warranty! To get the most out of your SmartDrive + PushTracker, download the PushTracker App from the Apple or Google Play App Store.
What is the Max mobility SmartDrive wheelchair power assist device?
The Max Mobility SmartDrive Wheelchair Power Assist device is exclusively intended to provide auxiliary power to manual wheelchairs to reduce the pushing power needed by their users, including pediatrics, with a user weight of 30 to 331 lbs (14 – 150 kgs).
What should I look for when using the SmartDrive and pushtracker?
Always inspect your SmartDrive, PushTracker, attach- ment hardware and the optional thumb throttle buttons for missing parts / damage prior to each use [see the “Mainte- nance” section(s) for parts to pay attention to]. Make sure both the SmartDrive and PushTracker are charged before use.
Why does the SmartDrive get hot?
Surface temperatures of the SmartDrive can increase and become hot to the touch when exposed to external sources of heat, such as sunlight. Using Anti-Tippers substantially reduces your risk of fall- ing over backwards, which can cause serious injury.
