Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. As you can see, it’s probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don’t need heat.
Why won’t my pilot light light on my gas fireplace?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
What would cause a gas fireplace not to ignite?
Another common issue with ignition is a dirty pilot light orifice, caused by a buildup of soot and dirt. If you have successfully re-lit your pilot light, ensured that the orifice is clean, and the fireplace still refuses to ignite, there could be an issue with the thermopile, thermocouple or wiring.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
Should I turn off pilot light gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. So, if you see the word “pilot” written on the knob, you know that you have a “standing” or “always on” pilot light.
Why does my pilot light keep going out on my gas logs?
If the pilot light on your gas fireplace won’t stay lit, a very likely culprit is a component called a thermocouple. A thermocouple is a safety device and is a component of the ignition system. Its purpose is to not allow the gas valve to open if the pilot light isn’t lit.
What makes pilot lights go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
Should pilot light be turned off in summer?
A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.
How do you clean a gas fireplace pilot light?
How to clean your gas fireplace: First, turn off the gas and electrical power and let your fireplace cool down. Remove the logs/stones/coals and the burner. Take them outside and with a soft-bristle nylow brush, clean them off. Turn off the pilot light and use a dry cloth to clean the pilot nozzle plus the burner asseembly.
What causes a gas furnace pilot light to go out?
The most common cause for a furnace pilot light to repeatedly go out is a broken thermocouple. The thermocouple controls the pilot light, so if it is damaged or needs cleaning, it can cause the pilot light to malfunction. Thermocouples are easy to replace yourself; they can be purchased at local hardware and home improvement stores.
How to light a pilot light?
– Make sure the oven is turned off. – Open the oven door and locate the pilot light opening at the bottom of the oven. – Use a grill lighter or long match to light the pilot light valve at the bottom of the oven. – Some ovens are designed to be manually lit at each use. In this case, slowly turn the temperature knob while holding the flame to the pilot light valve. – Close the oven door after the pilot light ignites.
How to clean pilot orifice?
Shut off all of the stove’s burners and oven cabinet.
