Toggle switch that controls the input signal from the weather sensor (Rain-Clik, Freeze-Clik, Wind-Clik, etc). When the switch is set to “Bypass” the controller will ignore the signal from the sensor and irrigate normally.
How does the Rain Bird rain sensor work?
How rain sensors work. The two leading manufacturers of irrigation products, Rain Bird and Hunter, both make rain sensors and both detect rain using the same method. They have a series of porous cork discs that when they get wet from rain, they expand and force the sensor to prevent the controller from watering.
How do I know if my Rainbird rain sensor is working?
Testing the System Once installed, the completed system can be tested by turning on any controller irrigation zone, verifying that zone does come on, and then pressing down on the Rain Sensor pin located on the top of the dial cap. The irrigation system should stop watering within a few seconds.
How do you bypass an irrigation rain sensor?
Simply turn the dial to RUN (BYPASS SENSOR) and the weather sensor will be overridden. The wireless rain sensor may be bypassed by using the built-in bypass feature on the receiver. To bypass the sensor, press the SENSOR BYPASS button on the receiver. The bypass status light will turn red when the sensor is bypassed.
How do you turn off a rain sensor?
Deactivate the rain sensor by pressing the rain sensor button or moving the stalk switch up to another wiper program. The rain sensor is deactivated automatically in ignition position 0 or when the engine is switched off.
How long does it take for Hunter rain sensor to dry out?
The dry out time could be as little as 4 hours depending on the weather conditions (temperature and humidity) and the rain threshold that is set.
How do I reset my Rainbird sensor?
Press and hold the left and right arrow buttons at the same time for at least 3 seconds. Until you see the word “CLEARED” on the screen. Your ESP-Me is now restored to the factory default settings.
How does the Rain Bird RSD series rain sensor work?
The Rain Bird RSD Series Rain Sensor automatically shuts off your sprinkler system when it rains, so you don’t have to worry when you’re home or away. The RSD Series Rain Sensor easily connects to most irrigation system controllers.
What is the safety information on the rain bird controller?
Safety Information cdWARNING:Date and time are retained by a lithium battery which is to be disposed of in accordance with local regulations. cdWARNING:Use only Rain Bird approved accessory devices. Unapproved devices may damage controller and void warranty.
How do I contact Rain Bird technical support?
Questions? In the USA or Canada call Rain Bird Technical Support at 1-800-724-6247 or visit our web site at
Why choose Rain Bird irrigation?
For more than 70 years, the world’s top irrigation contractors have chosen Rain Bird for the highest quality products and services available worldwide. The ESP-Me Controller Your new Rain Bird controller is designed to provide many years of advanced irrigation control.
