3/8-inch nap for smooth to light-textured walls. 1/2-inch nap for most walls and medium rough surfaces, such as textured plaster, and concrete. 3/4-inch nap for rough surfaces, such as textured walls and ceilings, textured plaster, and concrete.
What is the difference between a 1 2 and 3/8 nap roller?
1/4-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. 3/8-inch nap is good for lightly textured surfaces, including most interior walls. 1/2-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.
What is a synthetic roller cover?
Synthetic covers (nylon, dacron or polyester) – ideal for most latex paints. Natural covers (mohair or sheepskin) – should be used with oil-based paints. If used with latex paints, the water in the paint may swell the fibers, causing them to become matted.
What is a 3/4 nap roller for?
Ceilings and Drywall – Medium 3/8″ nap roller covers work best. Walls, Wood, and Metal – Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish. If you use a thick 3/4″ nap roller cover on a smooth wall, it will produce an orange peel textured surface.
Are knit or woven rollers better?
Knit versus woven? For smoother lint-free results with all paints, use a woven roller fabric—especially with higher-sheen coatings. For greater pickup and release (faster application), try a knitted fabric when using flats or eggshell paints.
What is a heavy nap roller?
Each roller has a different thickness of fabric or “nap”, specifically designed for different surfaces around the home. The thicker the nap or length of fabric, the more paint a roller will hold. The thicker the nap, the rougher the surface the roller is designed for.
What is a high nap roller?
Rough surfaces require a higher nap (3/4” to 1-1/2”) so the long fibers can reach into the valleys of the texture. Higher nap heights are great for textured plaster or stucco, siding, decks, concrete block, brick, and corrugated metal.
What is a microfiber roller?
Microfiber rollers are like traditional woven paint rollers but feature a wrap of microfiber cloth. Microfiber cloths are like normal cloth, but the fibers on microfiber cloths are extremely small. On a microfiber roll, the microfibers are adhered to the roller with heat, which makes microfiber rollers very durable.
What kind of roller do I need for a textured ceiling?
When it’s time to roll, use a low-nap roller for smooth ceilings and a 1/2-inch or 3/4-inch nap for textured ceilings. An extension pole attached to the paint roller frame helps you reach the ceiling without a ladder.
Can you use 3/4 nap walls?
Light to Medium Textured Surfaces – Microfiber rollers are best. Smooth Surfaces – Use a white woven short nap roller for an ultra fine finish. If you use a thick 3/4″ nap roller cover on a smooth wall, it will produce an orange peel textured surface.
What nap roller to use?
If you use a thick 3/4″ nap roller cover on a smooth wall, it will produce an orange peel textured surface. You should use a 1/4″ nap cover to produce a smooth finish. If you use a thin 1/4″ cover over stucco, the cover will rip apart quickly and not get paint into all the crevices of the surface.
What size nap to use when rolling walls?
1/4-inch nap for smooth or fine surfaces, such as new walls, ceilings, wood doors, and trim 3/8-inch nap for smooth to light-textured walls 1/2-inch nap for most walls and medium rough surfaces, such as textured plaster, and concrete 3/4-inch nap for rough surfaces, such as textured walls and ceilings, textured plaster, and concrete
What is a medium nap roller?
Medium 3/8″ nap roller covers are best for ceilings and drywall. Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish and are ideal for use on walls, wood, and metal surfaces. It’s important to choose the right size nap for your project.
What is a medium nap paint roller?
Nap Roller Covers. Synthetic fibers are ideal for latex paints and all surface textures. The longer the nap, the more paint the roller cover will absorb. Smooth surfaces generally require a nap of 3/16 to 1/4 inch. Medium, semi-smooth surfaces require a nap of 3/8 to 1/2 inch. Semi-rough surfaces, such as stucco, require a nap of 3/4 to 1 inch.
