LYSAGHT® KLIP-LOK® 700 is a new generation concealed roof and wall cladding profile. It has a wider span and better uplift performance than all available comparable profiles. KLIPLOK® 700 has bold ribs that makes a strong statement rising from the flat pans that are cross micro fluted.
What is Lysaght Klip Lok?
Description. A roofing and walling profile with a strong rib making a bold statement rising from flat pans with longitudinal fluting offering long, straight lines for a crisp and clean finish. Concealed fixed offering supreme watertightness.
What is Klip Lok roofing made from?
Colorbond steel
Their roofing sheets are made of Colorbond steel. They also have roofing sheets made of Zincalume steel As a result, their roofing sheets are strong (. 42 BMT thick or . 48 bmt klip lok) and durable.
Are there different grades of Colorbond roofing?
Colorbond is one of the most durable, long-lasting roofing materials available and its virtually maintenance-free. There are two main thickness grades of metal roofing. The standard 0.42 BMT grade and the thicker 0.48 BMT grade.
What is barge cap?
Barge Capping provides an aesthetically appealing finish and provides a watertight seal on gable roof ends. Barge Capping is commonly used on all roofing profiles and is a high quality, durable and cost effective way to give your roof an attractive finish. Made from COLORBOND®, ZINCALUME® or GALVANISED steel.
Can you walk on Klip-Lok?
Most Klip-lok suppliers will recommended a span of 2.2m between purlins, however this span can definitely be reduced depending on the size of your roof. The more purlins, the more support there is for walking on the roof sheets.
What is the minimum pitch for Klip-Lok roof?
1 in 50
Minimum roof pitch You can use KLIP-LOK 406 on roof pitches from as low as 1 degree (1 in 50) . it can also be used on walls.
How do you remove colorbond roofing?
Fairly easy to peel back sections of a colourbond roof, just undo the roofing screws all the way across. The further across you undo them, the easier it comes to lift it up. It can be a bit fiddly putting the screws and the panels back in to just the right spot though.
What is a clip lock roof?
Klip-lok roof sheets are specifically designed for flat roofs, between 0 – 1 degrees in incline. Unlike a traditional metal roof sheet, Klip-lok sheets are fixed with clips from below, instead of screws from above. Klip-lok roofs were commonly used on homes and commercial buildings around 40 years ago.
What is Klip-Lok® 700?
LYSAGHT® KLIP-LOK® 700 is a new generation concealed roof and wall cladding profile. It has a wider span and better uplift performance than all available comparable profiles. KLIPLOK® 700 has bold ribs that makes a strong statement rising from the flat pans that are cross micro fluted.
What is the as code for Lysaght Klip-Lok 700 hi-strength® design and installation guide?
Download LYSAGHT KLIP-LOK 700 HI-STRENGTH® Design and Installation Guide Testing was conducted in accordance with AS1562.1-1992 Design and Installation of Sheet Roof and Wall Cladding-Metal, and AS4040.2-1992 Resistance to Wind Pressure for Non-cyclonic Regions.
What are the features of a 700 hi-strength lok-lok 700?
KLIP-LOK 700 HI-STRENGTH® 1 Concealed fixed offering supreme watertightness 2 Onsite manufacturing available via mobile roll forming capability 3 Can be used with LOK-KLIP® end and expansion joint system 4 Nominal cover width: 700mm 5 Minimum roof slope: 1° (subject to design provisions being met)
