admin
The router’s default Password is “admin”, as for the User name, you can leave the field blank. For security purposes, it is recommended to change the default password. QUICK TIP: Changing the router’s password through the web-based setup page may prevent you from using the Linksys Connect software.
How do I setup my Cisco WRT610N router?
Configuring the wireless router as an access point….
- Access the router’s web-based setup page.
- On the web-based setup page, click Administration.
- Select Disabled under Upnp.
- Click .
- Click the Setup tab.
- On Internet Connection Type, select Automatic Configuration – DHCP from the drop-down menu.
What is router admin password?
The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly.
How do I reset my Linksys WRT610N router?
How can I reset the Linksys WRT610N v2 to factory defaults? Press and hold the Reset button of the Linksys WRT610N v2 at the back panel for about 10 seconds then release.
How do I setup my Linksys WRT160n router?
Configuration for Linksys routers: E1200, E1500, E2500, E3200, E4200, WRT160n
- Access the router’s browser-based utility. Log into your router’s browser-based utility by entering 192.168.
- Go to the “Setup” menu. Click on the “Setup” tab.
- Go to the “Basic Setup” page.
- Enter the first DNS resolver.
- Save your settings.
How do I configure the Linksys wrt610n router as an access point?
To configure the Linksys WRT610N Wireless-N Router as an access point, follow the instructions below: NOTE: By configuring a wireless router to serve an access point, the Internet port on the router should no longer be used. All Ethernet cables being used need to be plugged in to ports 1-4.
What is the wrt610n V2 simultaneous dual band wireless router?
The Linksys WRT610N v2 Simultaneous Dual-N Band Wireless Router is a simultaneous dual-band (2.4 GHz and 5 GHz) Wireless-N Router Gigabit Router with Storage Link. You can easily add Gigabytes of storage space onto your network using a USB hard drive.
How do I configure a Linksys router?
To configure a Linksys router, you need to physically connect the computer to the router in order to access its web-based setup page. Connect the computer to any of the numbered ports on the router. Before configuring your router as an access point, you need to configure the wireless settings of the router.
What ports does a Linksys router need to be plugged in?
All Ethernet cables being used need to be plugged in to ports 1-4. To configure a Linksys router, you need to physically connect the computer to the router in order to access its web-based setup page. Connect the computer to any of the numbered ports on the router.
