Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 7/16″ | 16mm | 5/8″ |
| 1/2″ | 19mm | 3/4″ |
| 9/16″ | 21mm | 13/16″ |
| 22mm | 7/8″ |
What is a 16mm socket in inches?
5/8 Inch
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 14mm | 9/16 Inch | 0.55118 Inches |
| 15mm | Just short of 5/8 Inch | 0.59055 Inches |
| 16mm | 5/8 Inch | 0.62992 Inches |
| 17mm | Just short of 11/16 Inch | 0.66929 Inches |
Which is bigger 16mm or 5 8?
16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch. 19mm = 3/4 inch.
What is 15mm in standard?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 9/16″ | 0.563 | |
| 15mm | 0.591 | |
| 19/32″ | 0.594 | |
| 5/8″ | 0.625 |
What size is a 17mm wrench?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 0.669 | 17mm | 17mm |
| 0.686 | 11/16 AF | |
| 0.709 | 18mm | 18mm |
| 0.710 | 3/8 Wworth; 7/16 BSF |
What is a 15mm wrench in standard?
What is a 16 mm wrench equivalent to?
yup, 16mm = 5/8″, and it’s so close that 8mm = 5/16, too! 19mm is almost interchangeable with 3/4″, and 13mm is only slightly off a 1/2″…
Is there a 16 mm socket?
Capri Tools 16 mm Universal Impact Socket, 3/8-Inch Drive, 6-Point, Metric.
What is 15mm in fraction?
| Decimal | Fraction | Metric |
|---|---|---|
| 0.0787 | 15 mm | |
| 0.0938 | 3/32 | 15.875 mm |
| 0.1181 | 16 mm | |
| 0.1250 | 1/8 | 17 mm |
What are the standard wrench sizes in order?
Standard American wrench sizes, from the largest to smallest and measured in inches, are 5/8, 19/32, 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 and 1/8. Wrenches are available in a set or individually. A small set has six to 10 wrenches, ranging from 5/16 to 1 inch in size.
What size is a socket wrench?
Socket wrenches are sold in four common sizes or drives: 1/4 inch, 3/8 inch, 1/2 inch, and 3/4 inch. When looking for American socket wrenches, remember that the 8 point sockets fit only square heads while 12 point sockets fit both hexagonal and square heads.
What is wrench size?
Although there are over 40 wrench sizes available between 5/16 of an inch and 7 inches, some common sizes, in inches, are 5/16, 3/8, 7/16, 1/2, 9/16 and 5/8. The wrench size is not the same as the bolt size.
