Re: No sound from skyq box Turn your Sky Q main box off at the wall. Take out the HDMI cable from the back of the box and TV, swap the ends around and plug them back in. Then turn the box back on again and let it reboot fully. See if that solves it.
How do you get sound on Sky?
Press Help on your Sky+ remote (located to the right of the Back Up button, which is directly below the down arrow). Press the left or right arrow to toggle audio description On or Off, then press Select to save the setting. Press Back Up to close the menu.
How do I get my sound back on my Sky remote?
Sky remote not working. First try rebooting your Q box. To reboot press Standby on your Sky Q remote (if the box responds to the remote), and then switch off and unplug at the mains. Wait at least 30 secs and then Plug back in and switch your Sky Q box back on at the mains.
How do I reset my sky sound box?
Re: Sky Soundbox not responding just has an amber light
- Switch off the power to your Sky Soundbox at the wall and wait for the lights on the front panel to go off.
- Press and hold down the power and volumedown buttons together.
- While you’re holding down the buttons, switch the power back on at the mains.
Why does my TV sound not work?
Make sure all A/V cable connections are properly connected to the TV. Test the TV using another source like a VCR, DVD player or Blu-ray Disc player. Perform a power reset on the TV. NOTE: For Android TV™ or Google TV™, follow these steps to perform a power reset.
Why is there no sound on some of my TV channels?
If you have audio on most channels, but have silence on some or all of your local network channels, you may have the Secondary Audio Programming (SAP) turned ON. The SAP feature allows your TV, VCR or Digital Cable box to tune in a second “track” of audio programming. Local network channels are a good example of this.
How do I fix my TV sound?
Increase the volume on the TV and/or your connected media device (streaming player, Blu-ray player, cable or satellite box, etc.). Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. Inspect the TV cables and ports, then check the ones on your devices as well.
Why is my Sky Q Voice control not working?
Check the Sky Q remote If Voice Control isn’t working, check your Sky Q remote for problems: Remove the battery cover off the body of the Sky Q remote. Take out the batteries and insert them again, matching the + and – signs.
How do I fix the sound cut out on my TV?
If your television is occasionally or intermittently losing audio, try the following steps:
- Make sure your Television’s speakers are turned On.
- Power cycle the television.
- Check to see if other devices have audio.
- Try connecting with a different cable.
- Reset the TV to factory defaults.
Why can’t I hear sound on my Sky Box?
If you’ve only got a sound problem on one channel, there’s probably a problem with the broadcaster rather than your Sky box. Try again later to see if the problem’s fixed. If you’ve got sound problems with your Sky Soundbox, follow our Sky Soundbox help guide instead.
How do I connect my Sky Box to my soundbar?
Connect the Sky box by optical to the optical input on the Soundbar marked Tv and select the Tv input using the soundbar remote. If all else fails, connect the Sky box Audio out Red/White RCA to the corresponding RCA L/R RCA inputs on the soundbar and you’ll get audio.
How does the Sky Box control the volume on the TV?
The sky box does not control the volume on your TV, it is the sky remote that copies your TVs remote control signals when it is programmed for your TV make/model
Why does My Sky remote need my TV make and model?
You’ll know, then, that your Sky remote needs the code for your TV make and model so that it can send the correct infra red signal to your TV to increase or decrease the volume. Your Sky box plays no part in this at all – your Sky remote will control your TV sound even if your Sky box is switched off at the plug.
